UHV Linear Transfer Mechanisms

Field free UHV linear transfer mechanisms. Ranges from 400 to 1600mm.

Our UHV linear transfer mechanisms are designed to transport sample holders/samples between chambers. They are commonly used to transfer samples from load lock chambers to system main chambers.

The linear transfer mechanisms are pumped by the system vacuum pump set or else with a dedicated pump set. The entire movement range of the transfer mechanism is via a single rotary motion feedthrough. The range of the transfer movement is from 400 to 1600mm. The single motion feedthrough takes care of both linear and rotary (if chosen) motions.

There are 2 types of linear transfers available:
• With forward movement only
• With forward movement and continuous rotation around the movement axis


 New! See a video of the manipulation & transfer of our SPM holder

Our linear transfer mechanisms are fully mechanical and without any magnetic parts which means both direct movement and closer access without slack, even after many years and hundreds of bakeout cycles.
• Ceramic bearings
• No magnetic field

Standard mounting flange is DN 63CF. Standard range of transfer lengths is every 50mm between 400 to 1600mm.

UHV Vacuum Linear Transfer Mechanism
UHV Linear Transfer Mechanism with Rotation
Details of our full range of vacuum manipulation solutions are available for downloaded here;icon UHV Manipulators


 
Copyright © 2014 Henniker Scientific. All Rights Reserved.