Low cost Effusion Cells / Thermal Evaporators for a wide range of thin film MBE growth applications.

The EF 40C1 Effusion Cells / Thermal Evaporators are highly reproducible and fully UHV compatible sources, designed for indirect resistive heating and delivering highly constant evaporation rates.

Effusion Cells / Thermal Evaporators : Application

The EF 40C1 Effusion Cells are suitable for use in all MBE systems. They have completely molybdenum-free construction and are recommended for use with low to medium vapor pressure materials, those that are likely to be evaporated or sublimed in the temperature range ~250° - 1500°C.

Effusion Cells / Thermal Evaporators : Additional information

• Crucibles – the medium temperature cell is available with 5cc crucible size. The most commonly used crucible materials are PBN and Al₂O₃ although other materials are available on request
• Integral manual or electro-pneumatic shutter – made of high purity Ta. Isolated from the crucible so that closing the shutter will interrupt the flux without disturbing the equilibrium within the crucible
• Integral water cooling – the EF 40C1 evaporators / effusion sources exhibit excellent cooling characteristics
• Sample Heating Power Supply HEAT1–PS
• Linear Shift (optional)

Data Sheet;   Effusion Cell Thermal Evaporator EF40 C1

EF40C1 Effusion Cells / Thermal Evaporators : Ta heater 1500oC operating temp 1600oC degassing temp +/- 1oC temp stability power consumption 300W 100-150mm working distance full software control, web enabled

EF40C1 Effusion Cell Power Supply:	EF40C1 Effusion Cell Software:
Dimensions:

Please use our contact form to request a full catalogue or to discuss your requirements with us.